Heater fan
1 - housing connection bracket; 2 - resistor
Fan motor
1 - capacitor; 2 – three-stage regulator; 3 - electric motor; 4 - brushes
Withdrawal
1. Remove ground wire from battery.
2. Remove the spring clips of the cover and the cover itself.
3. Disconnect the fan wire connector and ground wire on the body near the heater hoses on the bulkhead in the engine compartment.
4. Unscrew the nuts securing the fan housing and remove the fan.
5. Remove the 4 spring clips connecting the fan housing.
6. Remove the resistor and remove the fan motor from the case.
Visitor comments