Rear side of instrument cluster from 1986
1 - watch fastening; 2 – fastening of a speedometer; 3 - fastening of temperature and fuel gauges The arrows show the screws for connecting the instrument cluster housing
1. Remove instrument cluster.
2. Unscrew the screws securing the protective glass.
3. Loosen connecting screws (indicated by arrows) and separate the two halves of the body from each other.
4. To remove the speedometer, unscrew the fixing screws and pull the speedometer forward.
5. To remove the tachometer, unscrew the contact nuts and fastening screws and remove the tachometer from the front.
6. To remove the temperature and fuel gauges, unscrew 5 nuts and remove the gauges forward.
 |  |
7. To replace the baseless instrument cluster illumination bulb, press the plastic bulb holder and turn counterclockwise.
Visitor comments