Clutch specifications The clutch is designed for short-term separation of the engine and transmission when shifting gears or braking and their smooth connection when starting the car, as well...
Removing the clutch Clutch control actuator 1 - mechanism for automatic adjustment of free play; 2 - clutch pedal; 3 - clutch cable; 4 - clutch release shaft; 5 - clutch release fork; 6 -...
Clutch test 1. Check the clutch drive - traces of wear at the ends of the pressure spring (indicated by arrows) should be no more than 0.3 mm. 2. Check the reliability of the spring...
Clutch installation Centering the clutch disc Before installing a new clutch drive plate, completely remove the protective grease. Thoroughly clean the spline of the gearbox input shaft and...
Removal and installation of release bearing Release bearing 1 - clutch release fork; 2 - clamping bolt; 3 - bearing The presence of extraneous increased noise when disengaging the clutch (pedal pressed), indicates...
Removal and installation of the clutch cable Withdrawal 1. Press the clutch release lever against the bracket, remove the retaining washer and bushing, and disconnect the cable. 2. Remove the left upholstery under...
Free play adjustment Automatic freewheel selection mechanism 1 - ratchet; 2 - toothed sector; 3 - clutch pedal Due to the fact that with each engagement and disengagement of the clutch there...
Basic clutch malfunctions CAUSE ELIMINATION METHOD Incomplete clutch disengagement (clutch "leads"). With this malfunction, forward gear shifting is difficult, and reverse gear engages with noise...