Technical specifications Supply voltage - 12 V. The negative terminal of the battery is connected to the car body. Battery Capacity and designation: petrol engines 1.4 dm 3 - 240 A / 45 Ah;...
General information The ignition system ensures that the fuel-air mixture in each cylinder is ignited at the right time. The ignition system consists of spark plugs. ignition coils,...
Electrical circuits To protect electrical circuits, blade-type fuses are used, the color of which corresponds to the protection current of the fuse. The health of the fuse is determined by...
Battery Vehicles are factory-equipped with a maintenance-free battery that requires no other maintenance other than keeping the case and terminals clean. To clean the terminals,...
Removing and installing the battery Withdrawal Unscrew the nut and disconnect the negative terminal from the battery. Remove the plastic cover from the positive battery terminal, then unscrew the nut and...
Checking the charging system If the charging control lamp on the instrument cluster does not light after the ignition is turned on, then check the connection of the electrical wires to the...
Removal and installation of the generator Withdrawal Remove the negative terminal from the battery. Raise the front wheels and secure on stands. Unscrew the bolts and remove the drive belt mudguard (see fig....
Checking the engine start system If the starter does not work when the key is turned in the ignition, then the following reasons are possible: the battery is discharged. the electrical circuit between...
Removal and installation of a starter Withdrawal Remove the negative terminal from the battery. Raise the front of the car and secure it on stands. Unscrew the 2 nuts and remove the starter heat shield....