Measuring Disc Brake Lining Wear

The front pads wear out faster than the rear ones. Under normal driving conditions, check the pads every 20,000 km, but at least once a year. If the measurement shows that the thickness of the pad, including the base plate, is less than 6 mm, for the sake of caution, change the pads in pairs.

Stages of work

To properly check the pads, unscrew each wheel.

Take a coin approximately 6 mm thick and place it between the brake disc and the lining support. If the pads are about the same thickness as a coin, then replace all the segments on the corresponding axis at once.