Elements of the car interior Ford Focus 1
Interior trim
Torque specification Name Nm Pound-foot Pound inch Seat belt anchor bolt 38 28 - Interior trim This section is about removing and installing interior moldings and trim....
Torque specification Name Nm Pound-foot Pound inch Seat belt anchor bolt 38 28 - Interior trim This section is about removing and installing interior moldings and trim....
'A' pillar trim panel — removal and installation
Withdrawal 1. Remove the side panel of finishing of the panel of devices. 2. Detach the pillar trim panel "IN". 3. Remove the pillar trim panel "A". Remove and discard...
Withdrawal 1. Remove the side panel of finishing of the panel of devices. 2. Detach the pillar trim panel "IN". 3. Remove the pillar trim panel "A". Remove and discard...
'B' pillar trim panel — removal and installation
Withdrawal 4-door and 5-door variants and "station wagon" 1. Detach the lower seat belt anchor. Remove the seat belt bolt from the anchor. 3-door variant 2. Disconnect...
Withdrawal 4-door and 5-door variants and "station wagon" 1. Detach the lower seat belt anchor. Remove the seat belt bolt from the anchor. 3-door variant 2. Disconnect...
'C' pillar trim panel — removal and installation
Withdrawal All cars 1. Remove the rear luggage rack. 2. Fold back the rear seatbacks. "station wagon" 3. Remove the seat belt retractor trim panel. "hatchback" 4. Remove...
Withdrawal All cars 1. Remove the rear luggage rack. 2. Fold back the rear seatbacks. "station wagon" 3. Remove the seat belt retractor trim panel. "hatchback" 4. Remove...
'C' Pillar Trim Panel — 4-Door
Withdrawal 1. Open the luggage compartment lid and release the rear seat back latch. 2. Fold down the back of the rear seat. 3. Remove panels of finishing of mechanisms...
Withdrawal 1. Open the luggage compartment lid and release the rear seat back latch. 2. Fold down the back of the rear seat. 3. Remove panels of finishing of mechanisms...
Front door trim panel
Withdrawal 1. Remove the front door handle cover. To do this, insert a suitable tool into the specially provided hole and rotate the tool inside the hole. 2. Remove the...
Withdrawal 1. Remove the front door handle cover. To do this, insert a suitable tool into the specially provided hole and rotate the tool inside the hole. 2. Remove the...
Rear door trim panel
Withdrawal All cars 1. Remove the front door handle cover. To do this, insert a suitable tool into the specially provided hole and turn the tool inside the hole. 2....
Withdrawal All cars 1. Remove the front door handle cover. To do this, insert a suitable tool into the specially provided hole and turn the tool inside the hole. 2....
Trim panel of the rear side of the body
Withdrawal 1. Remove the pillar trim panel "IN". For more information, refer to the B-pillar Trim Panel chapter in this section. 2. Fold the rear seat cushion forward...
Withdrawal 1. Remove the pillar trim panel "IN". For more information, refer to the B-pillar Trim Panel chapter in this section. 2. Fold the rear seat cushion forward...
Door sill trim panel
Withdrawal 1. Remove the side panel of finishing of the panel of devices. 2. Remove the front door opening trim panel. 3. Remove the panel of finishing of an overlay of...
Withdrawal 1. Remove the side panel of finishing of the panel of devices. 2. Remove the front door opening trim panel. 3. Remove the panel of finishing of an overlay of...
Ceiling trim — removal and installation
General equipment: Flat screwdriver 6 mm. Withdrawal All cars 1. Remove pillar trim panels "A". For more information, refer to the A-pillar Trim Panel chapter found in...
General equipment: Flat screwdriver 6 mm. Withdrawal All cars 1. Remove pillar trim panels "A". For more information, refer to the A-pillar Trim Panel chapter found in...
Seat Specifications
Torque specification Name Nm Pound-foot Pound inch Nuts of fastening of a back of a forward seat 28 21 - Bolts of fastening of a pillow of a forward seat 28 21 - Bolt of...
Torque specification Name Nm Pound-foot Pound inch Nuts of fastening of a back of a forward seat 28 21 - Bolts of fastening of a pillow of a forward seat 28 21 - Bolt of...
Description and principle of operation of the seats
4-door variant shown Pos. Spare Part No Name 1 - CD changer unit (optional) 2 - Front seat back cover (With optional side airbag) 3 - Front Seat Back Foam 4 - Front seat...
4-door variant shown Pos. Spare Part No Name 1 - CD changer unit (optional) 2 - Front seat back cover (With optional side airbag) 3 - Front Seat Back Foam 4 - Front seat...
Seat diagnostics and checks (vehicles up to 08.2001)
Inspection and verification 1. Check the validity of the customer's complaint. 2. Check visually for obvious signs of mechanical or electrical damage. Visual Inspection...
Inspection and verification 1. Check the validity of the customer's complaint. 2. Check visually for obvious signs of mechanical or electrical damage. Visual Inspection...
Seat pinpoint tests (vehicles up to 08.2001)
NOTE: Use a digital multimeter to make all electrical measurements. PINPOINT TEST A: POWER SEAT DOES NOT WORK STATES DETAILS/RESULTS/ACTIONS A1: CHECK VOLTAGE SUPPLIED...
NOTE: Use a digital multimeter to make all electrical measurements. PINPOINT TEST A: POWER SEAT DOES NOT WORK STATES DETAILS/RESULTS/ACTIONS A1: CHECK VOLTAGE SUPPLIED...
Seat diagnostics and checks (vehicles after 08.2001)
Inspection and verification 1. Check the validity of the customer's complaint. 2. Check visually for obvious signs of mechanical or electrical damage. Visual Inspection...
Inspection and verification 1. Check the validity of the customer's complaint. 2. Check visually for obvious signs of mechanical or electrical damage. Visual Inspection...
Seat pinpoint tests (vehicles after 08.2001)
NOTE: Use a digital multimeter to make all electrical measurements. PINPOINT TEST C: POWER SEAT DOES NOT WORK STATES DETAILS/RESULTS/ACTIONS C1: CHECK VOLTAGE SUPPLIED...
NOTE: Use a digital multimeter to make all electrical measurements. PINPOINT TEST C: POWER SEAT DOES NOT WORK STATES DETAILS/RESULTS/ACTIONS C1: CHECK VOLTAGE SUPPLIED...
Seat diagnostics and checks (Duratec ST 2.0 l)
Inspection and verification 1. Check the validity of the customer's complaint. 2. Visually inspect for obvious signs of mechanical or electrical damage. Visual...
Inspection and verification 1. Check the validity of the customer's complaint. 2. Visually inspect for obvious signs of mechanical or electrical damage. Visual...
Seat pinpoint tests (Duratec ST 2.0 l)
NOTE: Use a digital multimeter to make all electrical measurements. PINPOINT TEST E: POWER SEAT DOES NOT WORK STATES DETAILS/RESULTS/ACTIONS E1: CHECKING THE VOLTAGE...
NOTE: Use a digital multimeter to make all electrical measurements. PINPOINT TEST E: POWER SEAT DOES NOT WORK STATES DETAILS/RESULTS/ACTIONS E1: CHECKING THE VOLTAGE...
Front seat — removal and installation
Withdrawal 1. WARNING: Wait at least one minute after disconnecting the battery ground wire before disconnecting any auxiliary restraint system electrical connectors....
Withdrawal 1. WARNING: Wait at least one minute after disconnecting the battery ground wire before disconnecting any auxiliary restraint system electrical connectors....
Front seat back — removal and installation
Withdrawal All cars 1. Raise the seat to its maximum height. 2. Remove the front seat cushion. For more information, refer to the Front Seat Cushion chapter available in...
Withdrawal All cars 1. Raise the seat to its maximum height. 2. Remove the front seat cushion. For more information, refer to the Front Seat Cushion chapter available in...
Front Seat Back (Folding Flat Seat)
Withdrawal 1. Remove the front seat. For more information, refer to the Front Seat chapter available in this section. 2. Remove the lower outer trim panel. 1. Detach the...
Withdrawal 1. Remove the front seat. For more information, refer to the Front Seat chapter available in this section. 2. Remove the lower outer trim panel. 1. Detach the...
Rear seat backrest — removal and installation
Withdrawal 1. Fold the rear seat cushion forward. 2. WARNING: Make sure that the belt stopper is installed at least 200mm from the belt stopper towards the seat belt...
Withdrawal 1. Fold the rear seat cushion forward. 2. WARNING: Make sure that the belt stopper is installed at least 200mm from the belt stopper towards the seat belt...
Rear Seat Backrest (Split Seat)
Withdrawal 1. Fold the rear seat cushion forward. 2. WARNING: Make sure that the band stopper is installed at least 200mm from the band stopper towards the seat belt...
Withdrawal 1. Fold the rear seat cushion forward. 2. WARNING: Make sure that the band stopper is installed at least 200mm from the band stopper towards the seat belt...
Front seat cushion — removal and installation
Withdrawal All cars 1. Remove the front seat. For more information, refer to the Front Seat chapter available in this section. 2. Remove the CD changer (CD) (in the...
Withdrawal All cars 1. Remove the front seat. For more information, refer to the Front Seat chapter available in this section. 2. Remove the CD changer (CD) (in the...
Rear seat back latch — removal and installation
Withdrawal 1. Fold forward backrest (And) rear seat. 2. Disconnect the seatback fixing cable. 3. Remove the seat back latch cover. Release the two locking tabs. 4. Turn...
Withdrawal 1. Fold forward backrest (And) rear seat. 2. Disconnect the seatback fixing cable. 3. Remove the seat back latch cover. Release the two locking tabs. 4. Turn...
Rear Seat Back Latch (3-Door/5-Door/Estate)
Withdrawal 1. Disassemble the rear seat back. For more information, refer to the chapter Rear Seat Back available in this section. 2. NOTE: To facilitate installation,...
Withdrawal 1. Disassemble the rear seat back. For more information, refer to the chapter Rear Seat Back available in this section. 2. NOTE: To facilitate installation,...
Front seat cushion — disassembly and assembly
Disassembly 1. Detach the cushion cover from the seat base. Detach the fastening strip. 2. Remove bent rings. 3. NOTE: Mark the position of the anti-squeak mat. Remove...
Disassembly 1. Detach the cushion cover from the seat base. Detach the fastening strip. 2. Remove bent rings. 3. NOTE: Mark the position of the anti-squeak mat. Remove...
Rear seat cushion (vehicles after 08.2000)
Disassembly NOTE: The procedure shows a dual rear seat cushion. The procedure for a single pillow is similar. 1. NOTE: Save the safety corner. Detach the seat cushion...
Disassembly NOTE: The procedure shows a dual rear seat cushion. The procedure for a single pillow is similar. 1. NOTE: Save the safety corner. Detach the seat cushion...
Front seat back — disassembly and assembly
Disassembly All cars 1. Remove the head restraint. 2. Detach the plastic fastening strip from the base of the seatback. 3. CAUTION: To avoid damaging the lumbar support...
Disassembly All cars 1. Remove the head restraint. 2. Detach the plastic fastening strip from the base of the seatback. 3. CAUTION: To avoid damaging the lumbar support...
Front seat back (flat seat) — disassembly and assembly
Disassembly All cars 1. Remove the head restraint guide tubes. Use a suitable screwdriver to release the locking tab. 2. Remove the screw covers securing the back of the...
Disassembly All cars 1. Remove the head restraint guide tubes. Use a suitable screwdriver to release the locking tab. 2. Remove the screw covers securing the back of the...
Rear seat back — disassembly and assembly
Disassembly 1. Raise the rear seat cushion. 2. Disconnect the lower fastening of the central back seat belt. 3. Remove a back of a back seat. 4. Remove the headrest...
Disassembly 1. Raise the rear seat cushion. 2. Disconnect the lower fastening of the central back seat belt. 3. Remove a back of a back seat. 4. Remove the headrest...
Rear seat backrest (split seat) — disassembly and assembly
Disassembly NOTE: 40/20 split seatback shown. 1. Remove the headrest (And). 2. Remove the headrest guides. Using a suitable screwdriver, press the locking tab. 3. Fold...
Disassembly NOTE: 40/20 split seatback shown. 1. Remove the headrest (And). 2. Remove the headrest guides. Using a suitable screwdriver, press the locking tab. 3. Fold...
Dashboard — removal and installation
General Equipment: One M6 x 100mm bolt. Withdrawal All cars 1. WARNING: Always wear safety goggles when working on a vehicle equipped with airbags and when working on...
General Equipment: One M6 x 100mm bolt. Withdrawal All cars 1. WARNING: Always wear safety goggles when working on a vehicle equipped with airbags and when working on...
Floor console (vehicles up to 10.2001, manual)
Withdrawal All cars 1. Disconnect a wire of weight from the accumulator. See Section 414-01 for more information. Cars with a cell phone 2. Detach the cell phone handset...
Withdrawal All cars 1. Disconnect a wire of weight from the accumulator. See Section 414-01 for more information. Cars with a cell phone 2. Detach the cell phone handset...
Floor console (vehicles after 10.2001, manual)
Withdrawal 1. Disconnect a wire of weight from the accumulator. See Section 414-01 for more information. 2. Remove the insert from the front of the floor console. 3....
Withdrawal 1. Disconnect a wire of weight from the accumulator. See Section 414-01 for more information. 2. Remove the insert from the front of the floor console. 3....
Floor console (vehicles up to 10.2001, automatic)
Withdrawal All cars 1. Move the gear selector lever of the automatic transaxle to the position "N". 2. Disconnect a wire of weight from the accumulator. See Section...
Withdrawal All cars 1. Move the gear selector lever of the automatic transaxle to the position "N". 2. Disconnect a wire of weight from the accumulator. See Section...
Floor console (vehicles after 10.2001, automatic)
Withdrawal 1. Disconnect a wire of weight from the accumulator. See Section 414-01 for more information. 2. Remove the insert from the front of the floor console. 3....
Withdrawal 1. Disconnect a wire of weight from the accumulator. See Section 414-01 for more information. 2. Remove the insert from the front of the floor console. 3....
Upper console — removal and installation
Withdrawal All cars 1. Disconnect a wire of weight from the accumulator. See Section 414-01 for more information. 2. Using a suitable screwdriver, disconnect the...
Withdrawal All cars 1. Disconnect a wire of weight from the accumulator. See Section 414-01 for more information. 2. Using a suitable screwdriver, disconnect the...
This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian
Focus 2
Focus Turnier 1
Focus 1
- General information
- Vehicle device
- Owner's manual
- Faults en route
- Maintenance
- First maintenance
- Second maintenance
- Applications
- Consumables and spare parts
- Auto mechanic tips
- Power unit
- Engine repair
- Engine seal parts
- Cooling system
- Exhaust system
- Supply system
- Clutch
- Car gearbox
- Front wheel drives
- Chassis
- Front suspension
- Rear suspension
- Steering
- Brake system
- Wheels and tires
- Body and coating
- Body elements
- Side doors
- Tailgate
- Salon elements
- Safety system
- Windshield wipers and washers
- Body Care
- Electrical equipment
- Instruments and motors
- Battery and alternator
- Egnition lock
- Engine management
- Headlights and lighting
- Switches and sensors
- Schematic diagrams
Focus Turnier 1
- General information
- Introduction to guide
- Car care
- Power unit
- Engine repair
- Lubrication system
- Cooling system
- Fuel injection (gasoline)
- Fuel injection (diesel)
- Ignition system
- Power and exhaust system
- Transmission
- Clutch and drive shafts
- Mechanical gearbox
- Automatic gearbox
- Chassis
- Car suspension
- Steering
- Wheels and tires
- Brake system
- Body
- Exterior
- Interior
- Heating and ventilation
- Electrical equipment
- Equipment and devices
- Lighting and signaling
- Power devices
- Electrical circuits
Focus 1
- General information
- Using the manual
- Identification codes
- Power unit
- Engine
- Engine 1.4/1.6 Zetec-SE
- Engine 1.6/1.8/2.0 Zetec-E
- Engine Duratec ST 2.0 l
- Engine Duratec 8V 1.6 l
- Diesel engine 1.8 l
- Engine cooling
- Fuel supply
- Accessory drive
- Launch system
- Ignition system
- Air and vapor
- Engine management
- Exhaust toxicity
- Exhaust system
- Automatic gearbox
- Clutch
- Mechanical gearbox iB5
- Mechanical gearbox MTX-75
- Mechanical gearbox MT285
- Chassis
- Front suspension
- Rear suspension
- Wheels and tires
- Front axle axles
- Brake system
- Hydraulic brake
- Anti-lock braking system
- Steering
- Body and coating
- Body panels
- Body elements
- Salon elements
- Glass, frames and mechanisms
- Windshield wipers and washers
- Car sunroof
- Seat belts
- Body repairs
- Back elements
- Electrical equipment
- Climate control
- Heating and ventilation
- Instruments and control lamps
- Battery and alternator
- Audio system
- Headlights and lighting
- Power distribution
- Electronic Function Group
FordBook.ru © 2014-2024 • Mobile version • Interesting to read • Sitemap: EN BG BY UA RS HR RO PL SK HU • Site search • Contact with administration
Focus 1 • Focus Turnier 1 • Focus 2 • Mondeo 1 • Mondeo 1 and 2 • Mondeo 2 • Mondeo 3 • Mondeo 4 • Escort 3 • Escort 4 • Escort 5 • Fiesta 2 • Fiesta 4 • Taurus 1 and 2 • Fusion • Scorpio 1 • Scorpio 2 • Sierra •
Focus 1 • Focus Turnier 1 • Focus 2 • Mondeo 1 • Mondeo 1 and 2 • Mondeo 2 • Mondeo 3 • Mondeo 4 • Escort 3 • Escort 4 • Escort 5 • Fiesta 2 • Fiesta 4 • Taurus 1 and 2 • Fusion • Scorpio 1 • Scorpio 2 • Sierra •