Replacement of the internal handle of a drive of the lock of a forward door

You will need a TORX T20 key.

1. Remove the front door upholstery (cm. «Removal and installation of an upholstery of a forward door»).



2. Remove the screw securing the inner handle to the door panel..



3.... slide the inner handle forward and remove its body from the holder.



4. By pressing from below on the stop of the sheath of the lock drive cable..



5.... remove the stop from the handle body.



6. Turning the cable sheath to the side and pressing the handle..



7.... disconnect the tip of the cable from the lever of the inner handle of the lock drive and remove the handle.

8. Install the parts in the reverse order of removal.