Battery design features

The manufacturer installs a maintenance-free battery with a nominal voltage of 12 V and a capacity of 60 Ah on vehicles. The battery elements are located in a polypropylene monoblock and are closed by a common cover, inseparably connected to the monoblock. The battery cover has holes closed with plugs for topping up with distilled water. The vent holes allow a small amount of gas generated in the battery to escape to the outside.

An electrolyte density indicator can be built into the battery cover, the readings of which take into account the temperature of the battery. There are three options for the indicator readings:

– green dot — the battery is charged;

- a dark indicator without a green dot - the battery is partially discharged, starting the engine is difficult or impossible;

- transparent or light yellow indicator - an excessive decrease in the electrolyte level due to a long recharge of the battery or its natural wear.

NOTE: Instead of a regular serviced battery, you can install any battery of other manufacturers that is similar in capacity and mounting dimensions. In this case, use and maintain the battery in accordance with the instructions supplied with it.