Removal and installation of a combination of devices

You will need: T25 TORX wrench, flat blade screwdriver.

1. Disconnect the wire from the terminal «minus» battery.



2. Remove the plug of the socket for installing the radio (cm. «Removal and installation of the instrument panel») or radio, depending on the configuration.

3. Remove the left central heater nozzle (cm. «Removal and installation of the instrument panel»).



4. Remove the steering column switches assembly with the connector (cm. «Replacing paddle shifters»).



5. Turn out two screws of fastening of a combination of devices.




6. Put your hand under the dashboard..



7.... and wring out the instrument cluster retainer.



8. Move the combination away from the instrument panel..



9.... press the latch..




10.... fold back the pad clamp..



11.... disconnect the wiring harness block and remove the instrument cluster.

12. Install the parts in the reverse order of removal.