1. Disconnect the wire from the terminal «minus» battery.
![](https://www.fordbook.ru/img/focus/12342.jpg)
2. Disconnect the wiring harness block from the ignition coil..
![](https://www.fordbook.ru/img/focus/12343.jpg)
3.... and tips of high-voltage wires.
![](https://www.fordbook.ru/img/focus/12344.jpg)
4. Turn out four screws of fastening …
![](https://www.fordbook.ru/img/focus/12345.jpg)
5.... and remove the ignition coil.
6. Install the parts in the reverse order of removal.
![](https://www.fordbook.ru/img/focus/12346.jpg)
NOTE: Lubricate the high voltage wire lugs with grease such as petroleum jelly before installation.
Visitor comments