Replacing Cruise Control Switches

The cruise control switches are mounted on the brake and clutch pedal brackets.

You will need a flat blade screwdriver.

1. Disconnect the wire from the terminal «minus» battery.



2. Squeeze the latch..



3.... and disconnect the block from the switch located on the brake pedal bracket.



4. Turn the switch counterclockwise..



5.... and remove it.



6. Squeeze the latch..



7.... and disconnect the wiring harness connector from the cruise control switch located on the clutch pedal bracket.



8. Turn the switch counterclockwise..



9.... and remove it.

10. Install the cruise control switches in the reverse order of removal.