Removal and installation of an oil cooler

1. Drain the liquid from the cooling system (Chapter 1). Disconnect the coolant hoses from the oil cooler.

2. Remove the oil filter fasteners (Chapter 1). Remove any oil spills.

3. Remove the filter adapter screws from the oil pump. Remove the oil cooler. Pay attention to the location of the connections and get ready to eliminate oil leaks from the radiator.

4. Installation - in the reverse order of removal, taking into account the following:

• A) Replace all O-rings and other seals removed during disassembly.
• b) Align the radiator connections so that they are in the same position (as before removal). Tighten the adapter to the required torque.
• V) Fill the cooling system (Chapter 1).
• G) Install the oil filter. Then check the oil level and add it to the engine if necessary (Chapter 1).
• d) Immediately after starting and warming up the engine to normal operating temperature, check for oil or coolant leaks.