Car wash and care Ford Mondeo 3

Car care products
It is much more comfortable to drive and ride in a well-maintained car than in an untidy rattletrap. In addition, with a possible sale, good care will add an extra one...

Internal cleaning — dirt has no chance
For a thorough internal cleaning, we recommend you: rags (non-rigid) for wet and dry cleaning, brushes for cleaning clothes and upholstery, a vacuum cleaner with a...

Outdoor sink
TECHNICAL DICTIONARY Care products for outdoor washing Car shampoo: cleans polished surfaces and removes oil residues. Washing mastic: has the same properties as a car...

Engine wash
Over time, oil, dust and infested insects combine in your Mondeo's engine bay to form an unattractive film of dirt that coats not only the engine and other components,...

To keep everything in motion, contact the lubrication service
Whoever lubricates well, drives well - a drop of oil, a well-dosed pinch of lubricant or a drop of added silicone sometimes do wonders: everything that is squeezed,...

If you want to save material values — take care of the coloring
Regular maintenance of varnished surfaces is a very rewarding job. For nondescript, dilapidated polished surfaces make your Mondeo both for you and those around you too...

Lacquer care
PROCEDURE First, thoroughly rinse and dry your car. In relatively inconspicuous places, first check «endure» whether the coloring action of the polish. Be careful with...

Decrease in product value — ugly color defects
While driving, your Mondeo is under «sustained shelling» various foreign objects. Small rising pebbles, even tiny grains of sand, at a high pace of movement, can turn...

Elimination of defects from stone impacts
PROCEDURE Eliminate the protruding edges around the hole in the varnish with a thin needle or a watch screwdriver. Carefully scrape off the rust with a sharp knife. Then...

Polishing small scratches
PROCEDURE Thoroughly clean the damaged area first with benzine or thinner. Polish off foreign colors (if any) in several working passes with polishing wool, sanding...

Elimination of large scratches
PROCEDURE If there are deep scratches on the bumper, fenders or doors, it is better to dismantle these body parts before repair. The result will be better if this work...

Installation for glass washing
Without «information» – no safety: good all-round visibility is a basic requirement for every armed road user. In order not to stay in your Mondeo even during rain,...

Checking the windshield wiper and washer
PROCEDURE Turn on the ignition, turn on the wiper motor. Does the wiper operate at two speeds? Is the intermittent wiper device operating? Does the windscreen wiper...

Pouring water into the washer
PROCEDURE During the summer, you should constantly replenish the supply of water for the windscreen washer. Adding a proportion of cleaning agent significantly increases...

Wiper blade rubber replacement
PROCEDURE Pull the wiper arm away from the glass. Pull back the retaining spring of the wiper blade until the notch is visible. Press the wiper blade down and remove...

Windshield washer nozzle installation
Depending on the equipment, your Mondeo may have heated nozzles on the engine hood. To increase their cleaning ability, the nozzles should be installed with a needle or...

Installation and dismantling of the washer nozzle
Clogged washer nozzles should be dismantled immediately and blown out with compressed air in the direction of the hose connection. Carefully push stubborn dirt with a...

Dismantling and installation of the wiper arm
Front wiper PROCEDURE Mark the original parking position of the wiper blade on the glass with adhesive tape. Pry the caps off the wiper arm pivot using a small...

Dismantling and installation of the front wiper motor
Dismantling PROCEDURE First make sure the wiper motor is in the rest position. Then press the wire to ground and remove the wiper arm as described above. Remove the...

Dismantling and installation of the rear wiper motor
Dismantling PROCEDURE Return the wiper motor to its original park position, disconnect the battery ground wire, and remove the rear wiper arm. Open the rear door and...