Tank Ventilation and Ventilation Check

            0




PROCEDURE
  1. Warm up the engine (up to operating temperature) and let it run at idle speed.
  2. Disconnect the low pressure hose coming from the activated carbon filter from the pressure reducing valve.
  3. Check the valve connection for underpressure. If not, check the function of the solenoid valve.
  4. To do this, disconnect the cable from the battery and remove the plug from the solenoid valve.
  5. Disconnect the hoses from the solenoid valve and remove the valve. Pre-mark the location of the connection - this will facilitate installation later.
  6. Check the valve, if it is purged, it is no longer working.







Link to this page in different formats
HTMLTextBB Code


Visitor comments


No comments yet





Mondeo 4 
Mondeo 3 
Mondeo 2 
Mondeo 1 and 2 
Mondeo 1