Vehicle transmission elements Ford Mondeo 3

Gear box device
Mondeo selects gears with a cable. In this chapter, you will learn how the Mondeo «sends» its engine power to the front wheels. The fuel transfer system, in particular,...

Clutch device
In Mondeo models with a manual transmission, the engine is separated from the gearbox by means of a single-plate dry clutch at every gear change – a proven solution for...

Clutch test
worn out (slippery) Grip is definitely recognizable when you are accelerating your car in top gear or driving through mountainous terrain. The engine rotates at high...

Does the clutch fully disengage?
If scratching or rattling noises are heard when shifting from lower to higher gears, then the clutch is most often not disengaged correctly. Carry out a test by...

Five-speed manual transmission
As standard, the Mondeo transfers its engine power to the drive wheels via «manually» switchable five-speed gearbox (MTX-75). MTX-75-Gearbox is «old acquaintances» from...

Gear shift adjustment
If the gears in your Mondeo are engaged or incorrect «have a snack», it is not necessary to get inside the gearbox - sometimes «plays pranks» rocker or switch rods....

Checking the transmission oil level (manual transmission)
State-of-the-art gear oils keep the gearbox running for a long time: that's why all Mondeo manual gearboxes are stocked with oil at the factory. Until you find large...

Automatic in combination with 2.0-litre Duratec-HE engine
Designated CD4E, the transmission is an electronic automatic 4-speed transmission for front-wheel drive vehicles. The CD4E automatic transmission works in conjunction...

Checking the transmission oil level (automatic transmission)
CD4E automatic transmissions, like all Mondeo manual transmissions, are provided with a durable oil. However, after extreme use of the car, for example, in heavy duty or...

Main gear
Engine power distributor to drive wheels: final drive 1 - Differential case, 2 - bevel gear, 3 - Gearbox output shaft, 4 and 7 - Satellite cone wheels, 5 - Remote...

Checking the cuffs of the drive shafts
PROCEDURE Put the front of the car with free hanging wheels on the goats. Turn the steering wheel all the way to the left and right. Rotate the wheel external to the...

Dismantling and installation of the drive shaft / control arm suspension
New or replacement shafts are mainly supplied in «protective cage», to prevent the hinges from twisting during transport. Remove the cage only after installation and...

Replacing the cuffs of the cardan joint
Joint seals today are designed in such a way that their service life is not inferior to the service life of the drive shafts. However, external injury, such as from...