Removal and installation of a forward door

You will need: socket heads "8" and "10", a screwdriver with a flat blade.



1. Holding the door (it's best if an assistant does it), unscrew the axle bolts of the lower..



2….and the upper hinge, lift the door, pulling the hinges on it out of the hinges on the body, and lower the door onto a stand installed at the level of the body sill.



3. Press the cover of the wiring harness block from top to bottom, while squeezing the block latches..



4.... and remove the block from the hole in the front pillar.



5. Press the screwdriver on the latch..



6.... and disconnect the wiring harness blocks.



7. Remove the left front door.

NOTE: The right door is removed in the same way.

8. Install the front door in the reverse order of removal.