Removal and installation of a back door

You will need: socket heads "for 8" and "for 10", a screwdriver with a flat blade.



1. Holding the door (it's best if an assistant does it), unscrew the axle bolts of the lower..



2... and the upper hinge, lift the door, disengaging the hinges on it from the hinges on the body, and lower the door onto a stand installed at the level of the body sill.



3. Remove the cover of the wiring harness block and disconnect the vehicle wiring harness block in the same way as you did when removing the front door (see Removing and installing front door).

4. Remove the left rear door.

NOTE: The right door is removed in the same way.

5. Establish a back door in an order, the return to removal.