Rear Door Exterior Handle Replacement

Replacing the outer handle of the left door is shown. The right door handle is replaced in the same way.

You will need a TORX T20 key.



1. Open the door, pry with a screwdriver and remove the plug from the hole in the rear end of the door.



2. Through the opened hole in the end, unscrew the screw securing the insert of the outer handle..



3….and remove the insert.



4. Slide the outside handle back and remove the handle by disengaging its leash from the lock lever and the front latch from the door panel.



5. If the front..



6….and the rear outer handle pads are loose, badly deformed or torn, replace them.

7. Install the rear door exterior handle in the reverse order of removal.