Replacement of the internal handle of a drive of the lock of a forward door

You will need: TORX T20 wrench, flat blade screwdriver.

1. Remove the front door upholstery (see Removing and installing front door trim).



2. Turn out the fastening screw from a piston of the case of the internal handle of the lock.



3. Using a screwdriver, pry off the inner handle housing and remove the fastening clip from the inner door panel.



4. Slide the inner handle forward and remove its body from the holder (Pictured is a yellow holder)



5. Pressing on the tip of the lock drive cable sheath from below, remove the tip from the handle body.



6. Pressing the handle, disconnect the tip of the cable from the lever of the inner handle of the lock drive..



7….and remove the handle.

8. Establish the internal handle of a drive of the lock of a forward door in an order, the return to removal.