Interior (internal body elements) Ford Mondeo 4

Removal and installation of a forward seat
You will need: TORX T50 wrench, socket "8". NOTE: The operation is shown on the example of the left seat, the right seat is removed in the same way. 1. Disconnect a wire...

Removal and installation of a back seat
The rear seat cushion consists of two parts, each of which can be removed separately. The removal of the left side of the pillow is shown, the right side is removed in...

Removal and installation of floor tunnel lining
You will need: TORX T25 wrench, 10 socket socket, flat blade screwdriver. 1. Disconnect a wire from the minus plug of the storage battery. 2. Prying off the edge of the...

Removal and installation of an internal mirror
No tool is required to remove the interior rearview mirror. 1. Disconnect a wire from the minus plug of the storage battery. 2. Remove the bottom facing of a mirror,...

Dashboard
Pic. 11.2. Dashboard: a - front passenger airbag installation area; 1 - outdoor lighting control unit; 2 – a combination of devices; 3 - radio; 4 - switches; 5 - control...

Removal and installation of the instrument panel
You will need: TORX keys T15, T20, T40, "13", "15", socket head "10", flat blade screwdriver. 1. Disconnect a wire from the minus plug of the storage battery. 2. Remove...

Removal and installation of facings of salon
You will need: Flat and Phillips screwdrivers. NOTE: Removal and installation of facings from the left side of salon are shown. Facings on the right side are removed in...

Removal and installation of facings of a luggage carrier
You will need: Flat and Phillips screwdrivers. 1. Open the trunk lid. 2. Grasping the loop.. 3….remove the boot floor mat. 4. Remove the four fastening clips of the rear...

Removal and installation of the shelf of fastening of the rechargeable battery
The battery mounting shelf is removed for replacement if it is damaged and to gain access to other vehicle components. You will need: socket head "10", a screwdriver...