1. Remove the cap of the power steering reservoir, pump out the working fluid from the reservoir (e.g. with a large syringe) and install the plug in place so that dirt does not get into the tank.
2. Squeeze the bent ears of the clamp, slide the clamp along the hose and disconnect the pump suction hose from the tank.
3. Similarly disconnect from a tank a drain hose of the steering mechanism.
4. Remove the power steering reservoir by depressing the reservoir retainer and lifting it upwards from the bracket on the radiator frame.
5. Install the power steering reservoir in the reverse order of removal.
6. Fill in the working fluid and bleed the air from the power steering system (see Bleeding the Power Steering System).
Visitor comments