Interior (internal body elements) Ford Fusion

Removal and installation of a forward seat
You will need a TORX T50 key. Note. The work is shown for the left seat, the right seat is removed in the same way. 1. Disconnect the wire from the terminal «minus»...

Removal and installation of a back seat
The rear seat cushion and backrest consist of two parts, each of which can be removed individually. The removal of the left side of the pillow is shown, the right side...

Removal and installation of floor tunnel lining
You will need: TORX T25 wrench, flat and Phillips screwdrivers. Note. The driver's seat has been removed for clarity. The seat does not need to be removed to gain access...

Design features of the passive safety system
Passive safety system (SRS) The Ford Fusion combines frontal airbags for the driver and passenger in the front seat and seat belts for the driver and all passengers in a...

Removal and installation of the driver's airbag
The driver's airbag has to be removed when repairing the steering and electrical equipment of the car. Therefore, the process of its removal and installation is...

Replacing the front seat belt
Note. Replacing the front seat belts is shown using the driver's seat belt as an example. The front passenger seat belt is replaced in the same way. You will need a TORX...

Replacing the rear seat belt
This subsection shows the replacement of the seat belt for the middle and left passengers in the rear seat. The right passenger seat belt is replaced in the same way....

Electronic control unit for additional passive safety system
You will need: all the tools needed to remove the field tunnel lining, plus a socket head «on 10». 1. Disconnect the wire from the terminal «minus» battery. 2. Remove...

Removal and installation of an internal mirror
You will need a flat blade screwdriver. 1. Press the lock on the mirror bracket with a screwdriver.. Note. This is how the latch is located on the mirror bracket (for...

Design features of the instrument panel
Dashboard (pic. 11.1) has a collapsible design, consisting of a decorative panel and a frame. Pic. 11.1. Dashboard: 1 – a combination of devices; 2 - a box for...

Removal and installation of the instrument panel
You will need: T25 TORX key, socket head «on 10», «at 12», Phillips screwdriver. 1. Disconnect the wire from the terminal «minus» battery. 2. Remove facings of forward...

Design features of the heater and air conditioner
On the Ford Fusion, the interior heating and ventilation system is controlled independently from the air conditioning system when performing the functions of heating and...

Control unit for the heating, air conditioning and ventilation system
You will need a Phillips screwdriver. 1. Disconnect the wire from the terminal «minus» battery. 2. Remove the overlay of the central console of the instrument panel...

Removal and installation of the filter for cleaning the air entering the passenger compartment
You will need a Phillips screwdriver. 1. Remove the left overlay of facing of a tunnel of a floor. 2. Remove the brake and accelerator pedal assembly (see « Removal and...

Replacing handrails in the cabin
You will need a flat blade screwdriver. 1. Tilt the handrail down against the force of the return spring. 2. Press out the two fastening latches with a screwdriver.....

Replacing the glasses compartment
You will need: Flat and Phillips screwdrivers. 1. Fold the eyeglass case down, overcoming the force of the return spring. 2. Using a screwdriver, open the decorative...

Replacing sun visors
You will need: Flat and Phillips screwdrivers. 1. Remove the axis of the visor from the latch.. 2.... remove the two screws securing the sun visor bracket.. 3.... and...

Removal and installation of facings of salon
You will need: T50 TORX wrench, flat and Phillips screwdrivers. Note. Removal and installation of facings are shown on the left side of the passenger compartment....

Removal and installation of casings of a steering column
You will need a TORX T25 key. 1. Press the two latches.. 2.... and remove the upper casing of the steering column. Note. The steering wheel has been removed for clarity....

Removal and installation of facings of a luggage carrier
You will need: T50 TORX wrench, flat and Phillips screwdrivers. 1. Open the tailgate. 2. Remove from door holders (left and right) the upper ends of the cords for...