Control unit for the heating, air conditioning and ventilation system

You will need a Phillips screwdriver.

1. Disconnect the wire from the terminal «minus» battery.



2. Remove the overlay of the central console of the instrument panel assembly with the control unit for the heating system (conditioning) and interior ventilation (see «Removal and installation of the instrument panel»).



3. Remove the four screws securing the heating control unit (conditioning) and interior ventilation to the panel..



4.... and remove the block.



5. Using a screwdriver, press the cable sheath fasteners..



6.... remove the tip of the cable sheath from the hole in the bracket..



7.... and remove the tip of the cable from the drive sector of the temperature regulator of the air entering the passenger compartment.

8. Install the heating control unit (conditioning) and interior ventilation and all removed parts in the reverse order of removal.