Replacing the power steering reservoir

You will need a container to drain the power steering fluid.



1. Squeeze the clamps, disconnect the hydraulic booster drain hose from the tank hose and drain the working fluid from the tank into a previously prepared container.



2. Squeeze the locks on the suction hose tip…



3.... and disconnect the tip from the tank fitting.



4. Remove the power steering reservoir from the bracket on the front panel..



5.... and remove the power steering reservoir from the engine compartment.

Attention! To prevent leakage of hydraulic fluid from the hoses, lift them above the hydraulic fluid level and fix them on the front panel.

6. Install the power steering reservoir in the reverse order of removal.

7. Bleed the air from the power steering system (see «Bleeding the power steering system»).