Rear light replacement

You will need a TORX T25 key.

1. Disconnect the wire from the terminal «minus» battery.

2. Remove facing of a back rack (see «Removal and installation of facings of a luggage carrier»).



3. Squeeze the latch..



4.... and disconnect the wiring harness connector from the rear light output.



5. Turn away the plastic holder of a back lantern in a luggage compartment.



6. Turn out two screws of fastening of a back lantern to a rack …

Note. This is how the screws for the outer mounting of the rear light are located.

7.... and, having overcome the force of the plastic retainer, remove the lamp.

8. Install the new headlight and all previously removed parts in reverse order.