Front seat adjustment

To ensure the most comfortable fit for people of different heights and builds, the position of the driver's and front passenger's seats can be changed in the longitudinal direction, in terms of the angle of the backrest and the height of the head restraint. In addition, the driver's seat is additionally equipped with cushion height adjustment, and the passenger seat (in a variant) - the possibility of folding the seat back and is equipped with an additional storage compartment.

Attention! Adjust the driver's seat only when the vehicle is stationary. If, while attempting to adjust while driving, you do not properly lock the seat in the longitudinal direction and it suddenly moves, you can lose control of the car.

To adjust the position of the front seats in the longitudinal direction, pull up the lock lever handle and move the seat on the slide to a comfortable position. After installing the seat, lower the handle and slightly move the seat back and forth until it is securely locked.



Adjustment of the inclination of the backrest is carried out by rotating the handle at the base of the backrest.




The seat cushion height adjustment lever is located on the left end of the seat.



If you need to raise the seat cushion, lift the lever up and release - the cushion will rise slightly. Repeat the operation until the pillow is in the most comfortable position for you.



If you need to lower the seat cushion, move the lever down and release, the cushion will lower slightly. Repeat the operation until the pillow is in the most comfortable position.




The front seat head restraints can be adjusted in height: press the lock and move the head restraint up or down to the desired height. The optimal position of the head restraint is that its upper edge is flush with the top of the head.

Note. For very tall people, raise the head restraint to its highest position, for very short people, lower the head restraint to its lowest position.

If necessary (e.g. to fold the seat into the sleeping position) the headrest can be removed.

To fold the passenger seat back..



...pull the latch..



...and fold the back. To bring the backrest to a horizontal position, turn the backrest tilt position knob to one side or the other.


Unfold the seatback in reverse order.

Note. For ease of folding the seat back, remove the head restraint.

Attention! The backrest of the front passenger seat must be in an upright position if the seat behind it is occupied by a passenger.

Attention! If the backrest of the front passenger seat is folded down while driving, the seat behind it can be occupied by children whose weight does not exceed 18 kg.

To use the compartment under the seat cushion, do the following.



Raise the front of the seat cushion up..



…slide it forward…



…and lift the back.

Install the seat cushion in reverse order.