Attention! Do not adjust the seats while the vehicle is in motion.
Longitudinal movement of the seat is made after lifting up the bracket located under the front of the seat. After the longitudinal adjustment and release of the clamp, it is imperative to check that the seat is clearly fixed in the new position.
Changing the height of the driver's seat cushion is done by turning the knob located in the front of the seat. Turning the handle counterclockwise raises the seat, and clockwise lowers it.
The inclination of the seat back is adjusted by turning the handle located at the bottom of the seat back.
To adjust the lower part of the seat back, lift the pump handle up, pump up (A) or bleed excess air by pressing the button (IN) until the desired back angle is obtained and lower the pump handle.
Heated front seats
The heating of the pillows and backs of the front seats is turned on by a switch with a control lamp located on the center console. Seats warm up in 5-6 minutes. Seat heating temperature is controlled by thermostats.
Visitor comments