Ignition key coding for anti-theft system

Insert the red master key into the ignition lock and turn to position II.

When the indicator on the instrument panel lights up, turn the key to position 0 and remove it from the ignition switch. The indicator will now illuminate for approximately 2 seconds, after which the encoding process must be completed within 10 seconds.

Insert an uncoded key into the ignition switch and turn it to position II. The coding is confirmed by the signaling device lighting up.

At the service station, you can replace the master key, set a new code, and also remove the code from an already encoded key. Such actions are performed, for example, when the ignition key is lost.