Replacing the rubber band of the wiper blade

Withdrawal

Fold up the wiper arm and secure.



Position the wiper blade at right angles to the lever.

Press the spring clip -A-, slide the wiper blade down from the lever hook.

Slide the brush up and through the hole -B- remove it from the hook of the lever.



From the locking side of the rubber band, squeeze both steel tires with pliers, pull them out of the upper holder and, together with the rubber band, pull out the wiper blades from the other holders.

Installation

Insert a new rubber band without tires loosely into one wiper blade holder.



Insert both tires into the rubber band so that the recesses in the tires face the band and are fixed on the protrusions of the grooves of the rubber band.

Compress both steel tires and rubber band with pliers and insert into other wiper blade holders so that their protrusions fit into the holding grooves of the rubber band.

Slide the blade onto the wiper arm and secure with a spring clip to the hook on the wiper arm.

Swing the wiper arm onto the glass. Make sure that the rubber band adheres to the glass along its entire length.