Steering with power steering of the car Ford Sierra

Power Steering — Design Description
Power Steering (A - ZF brands, B - Cam Gear brands) 1 - drive gear, 2 - drive gear housing, 3 - rack housing, 4 - gear rack, 5 - piston and connector, 6 - tie rods, 7 -...

Technical characteristics of the steering with power steering
Transfer number: – Cam Gear Transfer 19,88 – ZF transmission 16,77 Steering wheel speed (from end to end): – Cam Gear Transfer 3,58 – ZF transmission 3,50 Turning...

Removal and installation of steering gear
Removing Cam Gear Power Steering 1 - fastening bolts, 2 - high pressure pipelines supplying the hydraulic booster, 3 - high pressure pipeline supplying oil to the...

Removal and installation of the hydraulic pump
1. Raise the vehicle and unscrew the high pressure line from the hydraulic pump. 2. Move the pipeline aside and drain the oil from the hydraulic system. 3. Unscrew the...

Disassembly and assembly of the CAM GEAR steering gear
Disassembly 1. Remove the oil supply and return lines from the hydraulic booster. Seal the ends of the pipelines with plugs. 2. Disconnect the ball joints from the tie...

Disassembly and assembly of ZF steering gear
Disassembly 1. Disconnect the oil supply and return lines from the hydraulic booster. Plug the ends of the pipelines with plugs to protect against contamination. 2....

Removal and installation of a steering column
These steps are the same as for the steering system, without power steering (see corresponding description in subsection 8.4 ).

Disassembly and assembly of the steering wheel
These steps are the same as for the non-power steering system (see corresponding description in subsection 8.5 ).

Removing air from the steering system
1. Unscrew the oil fill plug in the power steering system and check the oil level in the system (with cold oil). If necessary, add oil to the required level. Attention!...