Note: Make sure the engine is completely cool before starting work. Drain approximately 1 liter as recommended in chapter 1 (1 quart) coolant from the radiator.
1. Disconnect the negative battery cable.
2. Locate the fan thermostat at the left end of the intake manifold (from the driver's side) - for V6 engines or on the cylinder head (for four-cylinder engines) - see pictures.
3. Remove the electrical connector from the thermostat.
4. Remove the thermostat (if possible, use a box wrench or socket wrench).
5. Wrap the threads of the new thermal switch with Teflon tape to prevent leaks.
6. Assembly is carried out in the reverse order.
Visitor comments